dg40
New Member
Posts: 2
|
Post by dg40 on Oct 2, 2015 18:05:13 GMT
Having VPN issues Main office running 1.34a IPsec mobile server with static IP. Remote office running 1.34a IPsec Tunnel client with dynamic IP.
WORKS GREAT!
When upgrading any version above 1.34a my IPsec VPN's break. Logs show tunnel is built but no traffic. FW rules are set correctly.
I would assume all old settings should work. Didn't even backup config between upgrades or downgrades
When downgrading back to 1.34a, the tunnel's came back online.
|
|
|
Post by Lee Sharp on Oct 3, 2015 18:04:53 GMT
We are working on some issues with mobile IPsec that were not found in initial testing. However, why are you using mobile IPsec for an office to office connection? Go with site to site VPN and a dynamic DNS account. (I use no-ip.org) With DPD, it works very well and is as stable as you can get. It is also bi-directional, so the main office can bring up the tunnel too.
|
|
dg40
New Member
Posts: 2
|
Post by dg40 on Oct 7, 2015 14:41:35 GMT
Thank you, This is working well when using ip address's
Wondering if you are aware of any way to host my own dynamic dns that is also compatable with smallwall. I see plenty of debian solutions but not sure of smallwall compliance. Perhaps this has been done before.
|
|
|
Post by Lee Sharp on Oct 7, 2015 22:27:07 GMT
The DynDNS (Custom) actually works with most services. I use it for No-IP myself. I keep meaning to update ez-ip updater, but never get around to it.
|
|